HP Deskjet 2546 Setup (Unboxing)

  • Unwrap the shipment box and remove the printer out of it.
  • Make sure that you clear all the protective materials that are kept on all sides of the printer.
  • Join the supplied power cord to the wall outlet and printer’s rear side to switch on the device.
  • Ensure that you don’t connect the power cable to the adapter.
  • Insert the provided ink cartridges into the printer slots by matching the color labels.
  • Load plain paper that is suggested for your printer into the input tray.
  • Click OK on the printer’s control panel to get an alignment page and use the same paper to align the installed ink cartridges.
  • Use the software installation CD that is found in the box to download the drivers.
  • Click the setup file for your HP Deskjet printer that has the .exe format on Windows and the .dmg format on Mac.
  • Establish the HP Deskjet 2546 setup after completing the installation process by the on-screen instructions.
hp deskjet 2546 setup

HP Deskjet 2546 Installation Guides

  • Tear off the package seal, take the printer out of the box, and remove all the tapes sticked on it.
  • Clear all the materials that are kept to the safeguard printer.
  • Eliminate the packing materials inside the printer by opening the cartridge access door.
  • Join the power cable that is provided with the package to the rear side and electrical outlet. Don’t try to connect it to the external power source.
  • To switch on the printing device, find the ON button and press it.
  • Install all the ink cartridges that are shipped with your printer into its relevant slot and then load paper into the tray.
  • Click OK on the printer’s control panel after installing the cartridges to get an alignment page. Align the installed ink cartridges with the help of this printed alignment page.
  • Insert the installation CD supplied to you into the computer’s disk drive.
  • Choose the .exe file on your Windows computer and the .dmg file for Mac based on your computer OS.
  • Finish the HP Deskjet 2546 setup and installation process by following the instructions that appear on the screen.

HP Deskjet 2546 Setup Without Usb

  • Check whether your computer is turned on with the internet connection.
  • Confirm whether the printer installation is complete and the input tray is loaded with paper.
  • Make sure you always place the printer within the range of the router.
  • Click the Download button on this website to download the most recent version of the driver.
  • Wait until the computer finishes the installation steps.
  • Do not click Continue on the Installer screen until the installation is finished.
  • Press the Wireless button that is present on the control panel of the printer.
  • Click Continue on HP Deskjet 2546 setup, installation Connect screen.
  • Carry out the on-screen instructions until you see the Connection Options window.
  • Choose the Wireless option, click Next, and select Next again on the HP Auto Wireless Connect window.