HP Deskjet 3722 Wifi Setup: Connect Printer to Wifi

HP Deskjet 3722 wifi setup can be carried out by doing any one of the methods available. The ways to set up Wi-Fi on your printer can be done by using Wi-Fi Protected Setup (WPS) or the printer software.

Searches Related to “hp deskjet 3722 wifi setup”

hp deskjet 3722 setup

hp deskjet 3722 wireless setup

how to scan on hp deskjet 3722

hp deskjet 3722 driver download

HP Deskjet 3722 Connect To Wifi

  • If you are looking for guides on HP Deskjet 3722 connect to wifi, then read the instructions here.
  • Get a wireless network that has a WPS-enabled wireless router and a computer connected to a wireless network.
  • Make sure that you connect the printer and computer to the same wireless network.
  • Connect to Wi-Fi using the Push Button method. Tap the Wireless button and hold for more than three seconds to initiate the WPS push mode.
  • Wait for the Wireless light to start flashing. Push down gently on the WPS button on your wireless router.
  • Notice the product when it starts a timer for around 2 minutes while a HP Deskjet 3722 wifi setup connection is established.
  • Use the PIN method to connect to Wi-Fi. Tap the Wireless button and the Information button together to print the network configuration page.
  • Spot the WPS PIN which is at the top of the printed information page.
  • Tap and hold the Wireless button on the control panel for more than 3 seconds. The wireless light starts to blink.
  • Open the software or utility for the wireless router or access point and type the WPS PIN. After 2 minutes, the Wireless light will flash when the connection is made successfully.
hp deskjet 3722 wifi setup

How To Connect HP Deskjet 3722 To Wifi

  • If you are thinking how to connect HP Deskjet 3722 to wifi, then follow these steps to establish a connection using the printer software for HP Deskjet 3722 wifi setup.
  • Windows : Obtain the following requirements like a wireless network, a computer connected to a wireless network, network name, and WPA passphrase.
  • Go to the manufacturer’s website, download the printer software, and install it. Select Wireless and go with the onscreen prompts to install the printer software.
  • Check if you already have the printer software installed on your computer. Open the printer software, tap Tools, and click Device Setup and Software.
  • Tap the Connect a new device option and then click Wireless. Continue by following the onscreen prompts.
  • Wait for some time. The blue Wireless light will stop flashing and remain lit after your printer connects successfully.
  • Mac : Check if you have the printer software downloaded and installed on your computer. Go to the manufacturer’s website.
  • Download and install your printer software on your computer from the website.
  • Go with the steps if you don’t have the printer software. Go to the Applications folder and double-tap HP Utility present in the HP folder.
  • Find the option HP Deskjet 3722 wifi Setup New Device at the top bar in the Devices menu and comply with the onscreen prompts. Once your printer is connected successfully, the blue Wireless light will stop blinking and remain lit.

HP Deskjet 3722 Not Connected To Wifi

  • The HP Deskjet 3722 not connected to wifi error can be resolved by restarting your devices and connecting them again to the wireless network.
  • Prepare the printer for a wireless connection by restarting the printer, router, and computer. Power off your printer and wait for 10 seconds.
  • Unplug the power cable from your printer and switch off your computer or the device you are using to print.
  • Reattach the power plug to the printer and turn it on. Remove the power cable from your router and wait for 10 seconds.
  • Reconnect the power plug to the printer and turn it on. Connect your printer to your network now by following the steps.
  • Use Wi-Fi Protected Setup (WPS) to connect your printer to your Wi-Fi. Spot the WPS button on your wireless router but do not tap it yet.
  • Power on your printer. Press the Cancel button on your printer’s control panel if it is in sleep mode. Reset the network settings of your printer.
  • Tap the Wireless and Cancel buttons and hold it until you see the Power light blinking. Do not proceed until you see the Wireless light blinking.
  • The network settings on your printer are now reset. Your printer will be in the setup mode for 2 hours.
  • Tap the WPS button on the router and hold it for 3-5 seconds until it denotes that the WPS connection process has started. The blue Wireless light will stop blinking and remain lit once the printer is connected and start work on HP Deskjet 3722 wifi setup.