• The Internet Service Provider (ISP) provides you with a network password if you have subscribed to the Internet Service. Use the same to connect HP Envy 4510 wireless setup password.
  • Check the document that is received from ISP for a password or at the below the router that is named as Wireless Key, WPA2 password, security password, or WEP key.
  • Try to contact your ISP if you don’t find your password.
  • Right-click on the network option present at the bottom of the Windows computer screen.
  • Select the option called Open Network and Sharing Center and click Change Adapter Settings.
  • Right-click on the printing device name, and select Status->Wireless Properties->Security->Show Characters.
  • The characters that are appeared on the screen is your network password.
  • On the Mac computer, select Finder and click the Go button.
  • Select the following: Utilities->Keychain Access->Local Items->Category Lists->Passwords->(printer name)->Show Password.
  • Type your admin password inside the prompt screen and click OK to display the password on the Mac computer.
hp envy 4510 wireless setup


  • Collect the Service Set Identifier (SSID) and password before you do HP Envy 4510 wireless setup to Mac laptop.
  • Check that your Mac laptop as well as the printer are turned on and it is in a ready state.
  • Get the USB cable but never connect it before downloading the driver.
  • Detach the USB cable if it is connected to the laptop. Tap the Wireless icon on your printer’s control panel.
  • Wait until the printer displays the Wireless screen.
  • Touch on the Settings icon to open the Wireless Setup Wizard.
  • Try to install the recent version of the driver for your printer by using the link on our page.
  • Select the exact OS version and check the compatibility.
  • Always download the full feature driver to get the entire features of printers.
  • Select the HP Envy 4510 wireless setup option under the connection type if you are using the router.


  • Check whether the printer turned on and not in sleep mode when HP Envy 4510 won’t print wirelessly.
  • On the printer’s control panel, press the Cancel icon.
  • Locate the Wireless icon on the printer control panel to reset the network settings.
  • Press and hold the icon for at least 3 seconds.
  • Look for the WPS button on the router.
  • Press and hold the button for at least 3 to 5 seconds.
  • Wait until the wireless connection initializes on the router.
  • Now tap the Wireless icon quickly to let the printer search for wireless connection.
  • Wait until the HP printer gets connected to the wireless network.
  • Confirm if the blue light near the Wireless icon turns on stable and start printing wirelessly using HP Envy 4510 wireless setup guide.